71007100 NS is an easy to apply solvent based Alkyd floor coating specially designed for applying on old 2 years, dry concrete for interior and exterior use. The coating has a good resistance against abrasion and neutral detergents no alkaline cleaning agents and is resistance during short contact periods against lubricating oils, fuel, petrol etc.br7100 Floor Coating is available in two versions, standard and anti slip NS with a special synthetic anti slip additive.brbrbRecommended Uses:bbr7100 Floor Coating can be applied on concrete floors older than 2 years, which are completely clean and dry. It is not recommended to apply on smoothdense concrete or concrete containing a damp repellent additive, which will prevent a good adhesion.br7100 Floor Coating can also be applied on old good adhering coatings.br7100 can be applied onto metal floors which have been correctly prepared and primed with a suitable Rust-Oleum metal primer.brbrbSpecifications:bbrSize: 2.5 litrebrAppearance: Gloss 60: 90&37brColour: Steel GreybrDensity: 1,0 -1,1 kgl depending on colourbrSolids Content: 36 - 40 volume &37 depending on colourbrViscosity: 75 - 80 Krebs Stormer units 7100NS: 85 - 90brRecommended film thickness: 50 m dry, equal to 130 m wetbrVOC-content: 456 gl max.brReady-to-use mixture: 485 gl max.brCategory: AibrEU Limit values: 600 gl 2007 500 gl 2010brbrbDrying times:b 20C50&37 r.h.brTo touch: 6 hoursbrTo recoat: 24 hoursbrFull hardness: 1 weekbrbrbCoverage:bbrTheoretical: 8,0 m2l at 50 m drybrPractical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
We don't know when or if this item will be back in stock.
Have one to sell? Sell on thamez.co.uk