Hello,
Shop By Department
Hello,
Brand: Azpects in
32%£2700 £39.99
3 to 5 days
Rejuvenator and Sealer for Driveways, Paths and Patios. EASYRevive+ is a water based, high performance sealer which has been specially developed for Asphalt surfaces as well as concrete and stone. Good resistance to water, dirt and oil stains. EASYRe
Rejuvenator and Sealer for Driveways, Paths and Patios. EASYRevive+ is a water based, high performance sealer which has been specially developed for Asphalt surfaces as well as concrete and stone. Good resistance to water, dirt and oil stains. EASYRevive+ is black in colour, it's tough and durable with a low sheen finish. Advanced formula not only seals and protects asphalt, concrete and stone, it makes asphalt look like new and transforms the appearance of concrete and stone. Leaves driveways and paths with a deep black finish. Can be applied using a roller or brush. Coverage up to 30m² subject to porosity and surface structure. Specifications Coverage: Up to 30m² Note: Coverage depends on the porosity of the drive and its texture ie. If the surface is particularly uneven, the area to be covered can be considerably larger than it appears. Easy to use Enhances the appearance Quick drying Tough Protects Covers stains Cost effective Surface colour after application is black Use on Driveways, Carparks, Paths, Patios Brief usage instructions USE NEAT AS SUPPLIED Before treatment: Test a small area first to ensure the final finish is satisfactory Make sure surface to be treated is clean, dry, stable and free from loose chippings Remove all dirt, moss and algae from the surface using a deep cleaner such as EASY Masonry Cleaner. If the area to be treated is heavily contaminated with moss and algae we suggest you use EASY Black Spot Remover instead Oil and grease deposits should be removed with a good quality degreaser before application, such as or EASY Grease & Oil Away Do not use on newly laid asphalt Always read the instructions carefully before use. EASYRevive+ is ready to use - do not dilute Shake the container well before use Apply with a soft brush or long pile roller, spreading over the surface at a rate of 5-6m per litre Apply 2 coats, allowing 4 hours between coats Apply between 10° - 30°C to a clean, dry surface on a dry day when rain is not expected for at least 24 hours after completion Some porous areas may benefit from an additional coat Restrict vehicle access for 24 hours, longer in cooler conditions Cleaning Remove as much product as possible from application equipment before cleaning. Clean brushes, rollers and other equipment immediately after use with soapy water Note: Coverage depends on the porosity of the drive and its texture ie. If the surface is particularly uneven, the area to be covered can be considerably larger than it appears
| Specifications | |
|---|---|
| TSIN | ITM4884960GB |
| EAN | 5060348980339 |
| Brand | Azpects |
Azpects, Azpects EASY4Rust - 1L
34%£3000 £45.50
Azpects, Azpects EASY Seal SSP Stone Sealer & Protector - 5L
8%£4499 £48.99
Azpects, Azpects EASY Seal BCS Block & Concrete Sealer - 5L
33%£4100 £61.50
Azpects, Azpects Aspects EASY Revive & Sealer - 5L
32%£2700 £39.99
Supporting the British High Street